{"product_id":"l-c100012k4c","title":"L-C100012K4C -  Crank Driven 12\" Lift Kit with Caster - 1000 lb","description":"\u003cp\u003eThe Crank Driven Lift Kit with Casters offers an ergonomic and versatile solution for height-adjustable workstations.\u003c\/p\u003e\r\n\u003cp\u003eThe kit includes four \u003cstrong\u003e\u003ca tabindex=\"0\" href=\"https:\/\/shop.flexpipeinc.com\/us_en\/w-4esblk-4-swivel-plate-caster-brake-for-lift-kit\"\u003eW-4ESBLK\u003c\/a\u003e\u003c\/strong\u003e 4 inch (100 mm) swivel plate casters with brakes, providing both mobility and secure positioning when needed.\u003c\/p\u003e\r\n\u003cp\u003eThe maximum \u003cstrong\u003eloading capacity is 1000 lb (454 kg\u003c\/strong\u003e) and the \u003cstrong\u003eadjustment range is up to 11.8 inch (300 mm\u003c\/strong\u003e).\u003c\/p\u003e\r\n\u003cp\u003eThe Bolt-On system is delivered as a kit for retrofitting. You can retrofit your work table that previously could not be adjusted in height with just a few steps, thus making it height-adjustable. System includes:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePump with a hand crank\u003c\/li\u003e\r\n\u003cli\u003eFour \"Bolt-On\" lift columns\u003c\/li\u003e\r\n\u003cli\u003eFour 3 m (9 ft.) sections of flexible tubing\u003c\/li\u003e\r\n\u003cli\u003eFour glides\u003c\/li\u003e\r\n\u003cli\u003eDrilling templates, tubing clips, and cable ties\u003c\/li\u003e\r\n\u003cli\u003eInstallation and operating instructions\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eReset Weight\u003c\/strong\u003e\u003cbr\u003eThe lifting systems are single-acting systems. This means that the load is lifted with the help of a hand crank or a motor, while it is lowered with the help of gravity. This is why a \u003cstrong\u003eminimum weight of 35 lb (15.9 kg) per cylinder is required\u003c\/strong\u003e to retract every cylinder and for even lift system retraction. This is to be taken into consideration when lifting loads with low weight or in the event of an uneven distribution of the load on the working surface. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eLoad distribution\u003c\/strong\u003e\u003cbr\u003eThe lifting systems are designed for loads that are unevenly distributed on the working surface. The maximum load on the working surface may not exceed the system's rated lifting capacity. The maximum load per cylinder may not exceed the rated lifting capacity divided by the number of cylinders x 1.5.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWork cycle\u003c\/strong\u003e\u003cbr\u003eThe lifting systems are designed for a work cycle of 10%. This means that nine minutes of resting time is provided per minute of operating time. \u003cstrong\u003eThese adjustable systems are not designed for continuous operation.\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003cbr\u003eMovotec lifting systems work best at operating \u003cstrong\u003etemperatures between 0°C and 45°C\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTube length\u003c\/strong\u003e\u003cbr\u003eSpecific lengths are specified for all standard lifting systems (see the drawing by clicking on the main picture) Individual hose lengths can be ordered at the customer's request within the permissible range. A ratio of tube lengths of 1:3 should be maintained. (Minimum hose length 0.5 m - maximum hose length 5 m).\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBending radius\u003c\/strong\u003e\u003cbr\u003eThe hydraulic lines to connect the pump to the lifting cylinders are to be laid so that the \u003cstrong\u003ebending radius of the hoses is not less than 50 mm\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDurability test\u003c\/strong\u003e\u003cbr\u003eThe lifting systems are tested regularly to ensure the flawless functioning of the system over \u003cstrong\u003eat least 10,000 complete up \/ down cycles\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eFor technical details and images, please search for the product using the 80\/20 interactive catalogue found here: \u003ca href=\"https:\/\/catalogs.8020.net\/80-20-Catalog-26\/C\/\"\u003ehttps:\/\/catalogs.8020.net\/80-20-Catalog-26\/C\/\u003c\/a\u003e. \u003c\/p\u003e","brand":"80\/20","offers":[{"title":"Default Title","offer_id":47455139397684,"sku":"L-C100012K4C","price":1378.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/4448\/7476\/files\/l-c100012k4c_-_crank_driven_lift_kit_casters_12587d63-ba39-4d4c-82c0-62e8aa0e80fa.jpg?v=1773360644","url":"https:\/\/rmmc.net\/products\/l-c100012k4c","provider":"RMMC","version":"1.0","type":"link"}